S-3011

BottcherFount S-3011 is a fountain solution additive for sheet-fed offset and continuous form printing. For medium and hard water.

Fountain Solution Additive

BottcherFount S-3010+ is a fountain solution additive for sheet-fed offset and continuous form printing.

Features

1. Standard dosage 2 -3 %
2. For IPA-reduction to 6 - 8 %
3. Very stable ink-/water balance
4. Reduced and stable water pick-up of the ink, therefore
5. Higher ink densities obtained
6. Fast start-up after machine standstill
7. For conventional and continuous dampening units
8. Very suitable for CTP plates
9. Increased plate protection
10. For water hardness 4 - 30° dH (total hardness)
11. pH-value 4.2 - 4.5 (according to water hardness)
12. Reduced calcium deposits on ink rollers
13. Minimises build up of paper dust and ink on the blanket
14. Suitable for metal pigment, UV and fluorescence inks
15. Effective prevention of foam
16. Increased conductivity per % input: 600 μS/cm
17. Density 1.13 (kg/l)

Note

Before applying BottcherFount S-3011, the fountain system must be completely emptied and cleaned thoroughly, preferably with BottcherPro Hydroclean.

Use BottcherPro Calcit as a re-hardener for RO and soft water.