Air Line Valves 
Pneumatics >> Janatics >> Air Line Valves
Flow Control Valve
GR2 series (Sizes : M5, 1/8, 1/4, 3/8, 1/2)
  • Directly mountable on cylinder/valve ports
  • Can be rotated by 360 degree
  • Fine regulation of air flow
  • Nickel plated body
  • Male threads(R) teflon coated
  • Elegant design and finish
Flow Control Valve - Metal
Series GR - Sizes: M5, 1/8, 1/4, 3/8, 1/2 (Metal type Flow control valves)
  • Directly mountable on cylinder/valve ports
  • Male threads (G) with sealing washer
  • Fine regulation of air flow
  • Elegant design and finish
  • Slotted head screw adjusting type
Flow control valve - Inline type
GR2 series (Sizes : Ø4, 6, 8, 10 & 12mm)
  • Available sizes : Ø4, 6, 8, 10 & 12mm
  • Fine regulation of air flow
  • Elegant design and finish
Quick Exhaust Valve
GQ series (Sizes : M5, G1/8, G1/4, G3/8, G1/2)
  • Increase the speed of the cylinder
  • With / without silencer
  • Connection - M5, G1/8, G1/4, G3/8, G1/2
  • Type GQ01 series is with silencer to reduce the exhaust noise
Pilot operated Non-Return Valve
GV2 series (Sizes : G1/8, G1/4, G3/8, G1/2)
  • Available in two versions
  • Low cracking and closing pressure
  • Bubble tight - elastomer seat
  • Plastic portion can be turned by 360°
  • Teflon pre-coated male taper threads
Inline Slide Valve
GS1 series (Sizes : R1/8, R1/4, R3/8, R1/2, R3/4)
  • Inline mounted
  • Sleeve type, saves space
  • Smooth, easy operation
Non Return Valve
GV1 series (Sizes : G1/8, G1/4, G3/8, G1/2)
  • In line mounting
  • Low cracking and closing pressure
  • Bubble tight elastomer seat
AND Valve
GA series (Sizes: M5, G1/8, G1/4)
  • AND valve delivers air at the outlet (A) only when air signal is present at both inputs (X and Y)
  • If two signals of different pressure is applied, the lower pressure is connected to outlet (A).
OR Valve
GB series (Sizes: M5, G1/8, G1/4 )
  • OR valve delivers air at the outlet (A) always supplied by higher pressure (X or Y)
  • If two signals of different pressure is applied, the higher pressure is connected to outlet (A)
Shut Off Valve - Hand lever
Series GS3 - Hand lever operated ball valves - G1/4, 3/8, 1/2, 3/4, 1, 1¼, 1½, 2
  • Ball type
  • In line mounting
  • Easy and smooth operation
  • Assembly on rigid pipe system
  • Maintenance free
  • Bubble tight sealing
Shut Off Valve - Knob type
Series GS3 - Knob operated ball valves - G1/8, 1/4, 3/8, 1/2
  • Ball type
  • In line mounting
  • Easy and smooth operation
  • Assembly on rigid pipe system
  • Maintenance free
  • Bubble tight sealing
Nelsons Bearing Centre
42/16-K-2, P.K.S.A. Arumuga Nadar Road, Sivakasi-626189.  Virudhunagar District,  Tamil Nadu,   INDIA.
Phone: +91-4562-272642 Mobile: 098430 79642
Email: nelsonsbearing@gmail.com
© Copyright 1985 to 2014. Nelsons Bearing Centre. All Rights Reserved.